P&P Blog

Changing your STIHL Leaf Blower's Air Filter

Your leaf blower's performance and longevity depend on proper care, and one crucial aspect is ensuring the air filter is in tip-top shape. The air filter is responsible for keeping dust, debris, and other contaminants out of your blower's engine, allowing it to run smoothly. In this step-by-step guide, we will show you how to replace the air filter in your STIHL leaf blower to keep it running at its best. So, put on your safety glasses, roll up your sleeves, and get ready to boost your leaf blower's efficiency with our expert guidance.

Tools and Materials:

  • STIHL leaf blower
  • Replacement air filter
  • Screwdriver
  • Clean cloth or compressed air
  • Safety glasses
  • Work gloves

Step 1: Safety First

Before you start any maintenance on your STIHL leaf blower, it's essential to prioritize safety. Make sure to wear safety glasses and work gloves to protect your eyes and hands from any debris or oil. Additionally, work in a well-ventilated area to avoid inhaling fumes and always operate your leaf blower on a flat surface.

Step 2: Turn Off and Cool Down

Ensure that your leaf blower is turned off and has had time to cool down if you've been using it. This step is crucial to prevent any accidental starts or burns during the maintenance process.

Step 3: Locate the Air Filter Housing

The air filter housing is usually located on the side or rear of your STIHL leaf blower, depending on the model. It is typically secured with a few screws, and you'll need to remove them to access the air filter.

Step 4: Remove the Screws

Using a screwdriver, carefully remove the screws securing the air filter housing. Place the screws in a safe location to avoid losing them. Once the screws are removed, gently pull the housing away from the blower.

Step 5: Access the Old Air Filter

Inside the housing, you'll find the old air filter. Carefully remove it from its compartment. Pay attention to how it's positioned as you'll need to replicate this with the new air filter.

Step 6: Clean the Housing

Before installing the new air filter, it's a good idea to clean the housing. You can do this by gently wiping it with a clean cloth or using compressed air to blow away any dirt or debris. A clean housing will help maintain the performance of your leaf blower.

Step 7: Install the New Air Filter

Now, take the replacement air filter and place it in the same orientation as the old one. Ensure it fits snugly within the housing.

Step 8: Reassemble the Housing

Carefully position the air filter housing back onto the blower, aligning the screw holes. Secure it in place by reinserting and tightening the screws. Make sure not to overtighten, as this could damage the housing.

Step 9: Final Check

Once the air filter housing is securely in place, give your STIHL leaf blower a final check. Make sure all the parts are properly assembled, and there are no loose screws. Ensure the air filter is correctly seated, and the housing is snug.

Step 10: Test Your Leaf Blower

With the air filter replaced, you're now ready to test your STIHL leaf blower. Turn it on and observe how it runs. You should notice improved performance and smoother operation. If everything seems in order, your maintenance task is complete!

Regular maintenance, such as replacing the air filter, is essential to keep your STIHL leaf blower in excellent working condition. This simple DIY task can help extend the life of your blower and maintain its peak performance. By following this step-by-step guide, you'll ensure that your leaf blower continues to be a reliable tool for all your outdoor cleanup needs. 




← Previous post
Next post →