Have Questions?
Our experts are here to answer your questions!
The STIHL 63PMC3 Picco Chainsaw Chain Reel, part number 3636 005 0410, is a professional bulk saw-chain reel featuring 3/8" low-profile Picco pitch, .050" / 1.3 mm gauge, semi-chisel cutters, a standard cutter sequence, and 410 drive links.
This 25-foot STIHL chain reel is designed for properly equipped chainsaw dealers, repair shops, professional users, and high-volume operators who make finished chain loops to exact cutting-system specifications.
STIHL Chain: 63PMC3
STIHL Part Number: 3636 005 0410
Reel Length: 25 ft.
Drive Links: 410
Also formatted as: 3636-005-0410 and 36360050410
STIHL 63PMC3 25' Reel Highlights
- STIHL 63PMC3
- Part Number 3636 005 0410
- 25-foot bulk chain reel
- 410 drive links
- 3/8" low-profile Picco pitch
- .050" / 1.3 mm gauge
- Semi-chisel cutter design
- Standard cutter sequence
- Recommended file: 4.0 mm / 5/32"
- Recommended saw size: up to approximately 40cc
- Recommended bar range: 10"–18"
- Single-humped drive-link kickback-reduction feature
STIHL 63PMC3 Picco Chainsaw Chain
The STIHL 63PMC3 is a low-profile Picco saw-chain configuration designed around a 3/8" low-profile pitch, .050" gauge, and semi-chisel cutter.
The semi-chisel cutter profile provides a practical balance of cutting performance, durability, and maintenance for compatible smaller-displacement chainsaws and guide-bar systems.
3/8" Low Profile Picco Pitch
This 63PMC3 reel uses 3/8" low-profile pitch, also identified within the STIHL Picco cutting-system family.
Low-profile 3/8" chain should not be treated as interchangeable with standard 3/8" chain solely because both use the term “3/8.”
The chain, drive sprocket, guide-bar nose sprocket, gauge, and complete cutting system must all match.
.050" / 1.3 mm Gauge
The STIHL 63PMC3 uses a .050-inch / 1.3 mm gauge.
Gauge identifies the thickness of the drive-link section that runs inside the guide-bar groove.
The guide-bar groove must match the chain gauge exactly.
410 Drive Links
The complete STIHL 3636 005 0410 reel contains 410 drive links.
Because this is bulk saw chain, individual finished loops use only the exact drive-link count required by the compatible chainsaw and guide-bar combination.
Semi-Chisel Cutter Design
The supplied specifications identify STIHL 63PMC3 as using a semi-chisel cutter.
Semi-chisel cutters use a more rounded working corner than aggressive full-chisel designs and can provide a useful combination of cutting performance and durability in normal working conditions.
Standard Cutter Sequence
This specific 63PMC3 reel uses a standard cutter sequence.
It should therefore be identified using its complete configuration rather than treated as a generic 3/8" low-profile chain.
STIHL 63PMC3 Specifications
| Specification | STIHL 63PMC3 |
|---|---|
| Brand | STIHL |
| Chain Designation | 63PMC3 |
| Product Format | Bulk Chainsaw Chain Reel |
| Reel Length | 25 ft. |
| Drive Links | 410 |
| Pitch | 3/8" Low Profile / Picco |
| Gauge | .050" / 1.3 mm |
| Cutter Type | Semi-Chisel |
| Cutter Sequence | Standard |
| Recommended File | 4.0 mm / 5/32" |
| Recommended Saw Size | Up to approx. 2.5 cu. in. / 40cc |
| Recommended Bar Length | 10"–18" / 25–45 cm |
| Kickback Reduction Feature | Single-Humped Drive Link |
| STIHL Part Number | 3636 005 0410 |
Recommended Saw & Bar Range
The supplied product information recommends this chain for saws up to approximately 2.5 cubic inches / 40cc and guide bars from approximately 10" to 18".
These ranges are general recommendations. Always verify the exact chainsaw, guide bar, sprocket, pitch, gauge, and required drive-link count before building or installing a finished chain.
Recommended File Size
The supplied sharpening specification for STIHL 63PMC3 lists a 4.0 mm / 5/32" file.
Use the sharpening equipment and procedure specified for the exact chain.
Single-Humped Drive Link
The supplied specifications identify a single-humped drive link as a kickback-reduction feature on the 63PMC3 chain.
This feature does not eliminate chainsaw kickback or replace proper chainsaw handling, training, personal protective equipment, and safe operating procedures.
Bulk Chain Reel vs. Ready-to-Install Chain
| 63PMC3 25' Reel | Pre-Cut Chain Loop |
|---|---|
| 25 ft. of bulk chain | One finished chain loop |
| 410 total drive links | Fixed drive-link count |
| Can produce multiple compatible loops | Built to one specific length |
| Requires breaking and riveting | Ready to install when correctly matched |
Professional Chain Assembly Required
This STIHL 63PMC3 reel is not a ready-to-install chainsaw chain.
Finished chain loops must be correctly measured, broken, joined, and riveted using appropriate chainsaw-chain assembly equipment, compatible joining components, and STIHL procedures.
An improperly assembled chainsaw chain can create a serious safety hazard.
Cross Reference Information
Based on the supplied cross-reference information, this STIHL chain configuration corresponds with the following chain families:
- Oregon 91VG
- Oregon 91PX
- Carlton N1C-BL
Cross-reference information should be used as a starting point only. Verify 3/8" low-profile pitch, .050" gauge, cutter configuration, drive-link count, guide-bar specification, and chainsaw application before substituting one chain product for another.
STIHL 3636 005 0410 Part Number
This 63PMC3 reel may be searched using several formats:
- 3636 005 0410
- 3636-005-0410
- 36360050410
- STIHL 3636 005 0410
- STIHL 63PMC3
- 63PMC3 25R
STIHL 63PMC3 Price & Availability
If you're looking for a STIHL 63PMC3 chain reel for sale, use the current price and inventory displayed directly on this product page.
This listing is specifically for the STIHL 63PMC3 25' chain reel, part number 3636 005 0410, containing 410 drive links with 3/8" low-profile Picco pitch, .050" gauge, semi-chisel cutters, and a standard sequence.
Frequently Asked Questions
What is STIHL 63PMC3?
STIHL 63PMC3 is a Picco low-profile chainsaw-chain configuration with 3/8" low-profile pitch, .050" gauge, semi-chisel cutters, and a standard cutter sequence.
What is STIHL part number 3636 005 0410?
3636 005 0410 identifies this 25-foot STIHL 63PMC3 bulk chainsaw-chain reel.
How many drive links are on the reel?
The complete reel contains 410 drive links.
What pitch is STIHL 63PMC3?
This chain uses 3/8" low-profile Picco pitch.
What gauge is STIHL 63PMC3?
This configuration uses .050" / 1.3 mm gauge.
Is STIHL 63PMC3 semi-chisel?
Yes. The supplied specification identifies the cutter type as semi-chisel.
What file size does STIHL 63PMC3 use?
The supplied sharpening specification is 4.0 mm / 5/32".
What bar lengths are recommended?
The supplied range is approximately 10"–18" / 25–45 cm. Verify the complete cutting-system specification before installation.
Does STIHL 63PMC3 have a kickback-reduction feature?
The supplied specification identifies a single-humped drive link as a kickback-reduction feature.
Does STIHL 63PMC3 cross-reference Oregon 91VG or 91PX?
The supplied cross-reference information lists Oregon 91VG and 91PX. Verify the full chain and application specifications before substituting products.
Is this a ready-to-install chainsaw chain?
No. This product contains 25 feet of bulk chain with 410 drive links. Finished loops must be correctly measured and assembled before use.
Is 36360050410 the same as 3636 005 0410?
Yes. 36360050410 is the compressed formatting of STIHL part number 3636 005 0410.
STIHL 63PMC3 25' Chain Reel – 410 Drive Links
Choose the STIHL 63PMC3 Picco chain reel when you need professional bulk chain with 3/8" low-profile pitch, .050" / 1.3 mm gauge, semi-chisel cutters, standard sequence, and 410 drive links.
STIHL Part Number: 3636 005 0410
Connect with us