Cub Cadet PRO Z 972 SD

Cub Cadet PRO Z 972 SD

Product Number: 53TIHMUY050

Have Questions?

Our experts are here to answer your questions!

515-265-8889   Contact Us

Type: Zero-Turn
Brand: Cub Cadet

Cub Cadet PRO Z 972 SD

35 HP Kawasaki FX1000v (999cc) engine and 16cc Parker HTG transmission.

72” triple-7-gauge fabricated steel cutting deck with top, bottom and side reinforcements.

3-year limited commercial warranty (no hour limitations) and 5 year / 1,750 hour limited deck construction warranty.

Dual rear wheels and weighted front rims for ultimate traction on slopes up to 25-degrees, or 46% grade. 12 volt outlet kit and electronic power deck lift included



STEERING: Multi-position Quick-adjust steering column.

Front Axle / Yokes: 2" x 3" solid axle tube with ISO dampening suspension and 1/2" thick steel front yokes.

ROPS: 2" x 2" spring-latch tool-less foldable 3 position.

Rear Bumper: 5/16" Thick Steel rear engine guard/pre-drilled mounting points for attachments with integrated rear hitch.

Frame: Fully welded, full-length 3/8 x 5" laser cut steel / integrated tie-down slots.

Park Brake / Braking: Hand-operated lever with integrated hydro pump release lever.

Seat Type: High-back Air-Ride suspension with EVC cushion, padded arm rests, ISO mounted base (lateral suspension),angle back adjust and lumbar support,seat belt.

Rear Tires: Dual TERRA TRAC Tread 25" x 9" - 12" (18" trac width).

Front Tires: 16" x 6.5" - 8" (turf) with weighted rim.

Lap Bar / Steering Wheel Control: High Performance Steering Wheel with electronic power steering & Foot-pedal Control.

Throttle/PTO/Key Switch: HD Low-profile throttle lever, sealed key switch & electronic fingertip engagement pto.

PTO Clutch: Warner PTO Clutch (200 ft. lb.) with Soft-Start.

Weight (approx): 1850 lbs.

L / W / H with discharge chute UP and ROPs DOWN: 88" L x 85" W x 49" H

Side Construction: 5/16"(.313) steel on trim and discharge sides.

Cutting Height: 1" - 5"

Top Reinforcement(s): 7ga. (.187") top plate.

Rolled Leading Edge Reinforcement: 1/4" (.250") steel.

Spindle Construction: 8" sealed cast aluminum housing (maintenance-free).

Discharge Chute: High-density, impact-resistant rubber.

Spindle Covers: Steel - Tooless Quick Release.

Deck Blades: Triple-blade / High-lift blade (standard) Marbain Blade.

Deck Height Adjustment: Foot pedal with spring assist, 16 Positions

Trim-Side Wear Guard: 3/4" Thick UHMW-PE Replaceable Trim-side Wear Guard.

Deck Material: fabricated 7ga. (.187”) steel shell.

Deck Size/Type: 72" FABRICATED DECK.

Bottom Reinforcement: 7ga. (.187") bottom plate.

Anti-Scalping: 4 Front HD w/ Bushings & Grease Zerk.

Deck Style/Construction: 7ga. top plate.7ga. bottom reinforcement
¼” rolled leading edge.

Cup Holder: Intergrated into Side Pod:

Hour Meter: Standard electronic.

WARRANTY: 3 year / no hour limit commercial warranty and 5 year / 1,750 hour limited deck construction warranty

Engine Type: Kawasaki FX1000v.

Horsepower / CC's: 35hp - 999cc

Fuel Capacity: Twin 7.45 gal. tanks (14.9 gal. total) with electronic fuel gauge.

Ground Speed: Fwd: 12 mph / Rev: 6 mph.

Transmission: Parker HTG 16cc pump / 310cc wheel motor